Pressure Reducing Valves (PRVs) Series

Product drawing»

Structural drawing»

You are here: News > News Detail

The size of the valve

2011-09-23

In the

petroleum, petrochemical, chemical, power, urban construction, the operating temperature of 200 degrees in the piping system can use metal

to metal sealing ball valve.
1:Determine the size of the valve needed based on the system demands. The term fall-off refers to the difference between the

pressures on the relief valve outlet and the inlet pressure. If the demand is more, there will be a greater fall-off. Study the performance curve

provided by the valve manufacturer. These charts, also known as valve capacity charts, show a plot of the flow rate against the pressure

fall-off for valves of various sizes. Choose the chart for the maximum flow rate of your system and locate the fall-off for this flow rate.

Select the valve size that gives a fall-off in the range of 10 to 15 psi for your system flow rate.
2:Determine the parameters by measuring the inlet pressure. Choose the outlet pressure you require, which should typically be in the

range of 50 to 70 psi for domestic applications. Decide on the minimum and maximum flow rates you need to maintain in gallons per minute or

liters per minute.
3: Consider the inlet water pressure. Pressure regulating valves can be direct acting, piston operated or externally piloted models.

Choose direct acting valves for flows ranging from low to moderate. For moderate to high flow rates, use piston operated or externally

piloted pressure reducing valves.

 

 

MORE NEWS

  • Gate valve with paint
  • Return
  • Shanghai MeiYan Yi Pump & Valve Co., Ltd.
    MeiYan Yi pressurereduce valve Contact MeiYan Yi
    Shanghai Enine Pump & Valve Co., Ltd.
    Enine pressurereduce valve Contact Enine
    Shanghai Saitai Pump & Valve CO., Lid.
    Saitai pressurereduce valve Contact Saitai
    Shanghai Fengqi Industrial Development Co., Ltd.
    FengQi pressurereduce valve Contact FengQi