A water pressure regulator is installed is reduced to substantially reduce all damage caused by the pressure and water consumption. We should maintain the pressure at the time of installation, reduces all types of oscillations.

The main application of the use of a water pressure reducing valves protect installations (domestic) by industrial applications.

Everyone knows that because of the high Pressure, a lot of water goes waste, after all. This unit is very important. There are two main types of water pressure reducer. One is the direct effect, while the other is the pilot to be served. Both have a globe valve as a corner or the body. The valves that are used in small pipes are made of brass, while those who have the pipes are made of ductile iron with a larger diameter. The main purpose of> Pressure of water to reduce pressure, thus reducing the pressure to normal levels when it reaches the end of the tap water. The size of the valve properly, or it can cause various ailments. A valve that does not cause the correct size in noise control. And the pressure can not be reduced to the desired level, if the size of the valve was not appropriate. These valves should be on different specifications, depending on the chosen flowRange and pressure range. The pressure valve can be an end to end configuration or a parallel configuration. It all depends on the actual pressure of water from the main tank. The valve is very important because the high pressure, if left unchecked, could lead to waste of water.