Stainless Steel 316L Steam Pressure Reducing Valve DN80 Price and Selection Parameters
Price Range and Market Factors
Pricing for a 316L DN80 steam pressure reducing valve varies significantly by brand and certification. Generic industrial models from Chinese manufacturers often fall within a broad range of US$199 to US$1,999 per unit, depending on the internal trim and flange standards. Premium brands with documented EN10204 3.1 certification and FDA-approved elastomers command substantially higher prices, sometimes exceeding US$15,000 for specialized sanitary configurations. The wide variance reflects differences in diaphragm life, seat leakage rates, and the availability of spare parts. Buyers should request a quotation specifying the spring range and flange drilling standard to ensure an accurate comparison.The main pressure reducing valve product names of China Pressure Reducing Valve Network include:200X diaphragm-type Reducing Valve,200P Reducing Valve,Air Filter Reductor,Branch Pipe Reducing Valve,Combined Type Reducing Valve,Corrugated Pipe Type Reducing Valve,Direct Effect-Type diaphragm Spring Reducing Valve,diaphragm Adjustable Reducing And Stabilized Valve.
Critical Selection Parameters
Flow capacity is the primary sizing criterion. For a DN80 valve, the Kv value must match the maximum steam mass flow required by the system. Pilot-operated stainless steel bodies in this size typically provide a Kv of approximately 64. This capacity suits medium-to-large steam loads where direct-acting valves would be undersized or exhibit excessive offset. Inlet pressure limits also dictate the choice; while some pilot-operated cast steel variants handle up to 26 bar g for saturated steam, stainless steel models often have lower pressure ceilings depending on the diaphragm chamber material.
Temperature and sealing materials are equally important. Standard EPDM seals are adequate for saturated steam up to roughly 180°C, but superheated steam or higher temperatures require PTFE or metallic seating options. For clean steam applications in pharmaceutical or food processing, the internal surface finish (Ra) and diaphragm compliance with FDA or USP Class VI standards must be explicitly stated on the purchase order. Finally, confirm the flange rating (PN16, PN25, or PN40) and whether an external sensing line is included, as reliance on an internal balance pipe can reduce usable capacity by up to 30%.
Do you still need to know or purchase the following pressure reducing valve products:
